Bagaimana untuk Mengira dan Keluarkan Sejumlah Digantung Padatan (PUSAT) dalam air Sisa Rawatan

1. Pengenalan

Total Suspended Solids (TSS) are the particulate matter larger than 2 µm that remain suspended in water, unable to dissolve. As a critical water-quality parameter, TSS is often regulated under discharge permits. Controlling TSS within permitted limits is essential for environmental compliance, protecting aquatic life, and avoiding regulatory penalties.

2. Mengapa TSS Penting

2.1 Kesan Alam Sekitar

• Reduced dissolved oxygen
  Suspended particles increase the oxygen demand of microorganisms, depleting dissolved oxygen (DO) and stressing aquatic species.
• Ecosystem disruption
  High turbidity blocks sunlight, hindering photosynthesis in aquatic plants and disrupting food chains.

2.2 Risiko Kesihatan dan Keselamatan

• Pathogens and toxins
  Bacteria, viruses, or heavy metals may adsorb onto particulates, posing risks if ingested.
• Drinking water concerns
  Water with elevated TSS is unsuitable for direct consumption without thorough treatment.

2.3 Cabaran Operasi dan Rawatan

• Clogging and wear
  High TSS levels abrasively damage pumps, pipes, and filters, leading to frequent maintenance and downtime.
• Reduced treatment efficiency
  Excess solids can inhibit aerobic processes and, in severe cases, lead to unwanted anaerobic digestion and methane generation.

3. Common Sources of TSS in Wastewater

• Natural inputs — Soil erosion, stormwater runoff, algal blooms.
• Industrial and urban activities — Manufacturing effluents, food and beverage processing, landfill leachate, construction site runoff.
• Biogenic material — Leaves, grass, and organic detritus introduced via sewer inlets.

4. Hubungan Antara TSS, BOD dan COD

Biokimia Oksigen Permintaan (BAD) measures oxygen consumed by bacteria to decompose organic matter. Higher TSS often correlates with higher BOD.
Kimia Oksigen Permintaan (COD) quantifies oxygen required to chemically oxidize organic compounds. Reducing TSS also lowers COD, improving overall water clarity and oxygen availability.

5. Mengira Kecekapan Penyingkiran TSS

To determine how effectively a treatment process removes TSS:

1. Measure influent TSS concentration (TSS_i) and effluent TSS concentration (TSS_e) in mg/L.
2. Apply the formula:

Removal Efficiency (%) =
(TSS_i − TSS_e) / TSS_i × 100

6. Kaedah Penyingkiran TSS

6.1 Rawatan Biologi

Aerobic treatment uses oxygen and microorganisms to digest organic particulates, producing volatile suspended solids (VSS) or sludge.
Anaerobic treatment operates without oxygen, transforming organics into biogas.

Key equipment: Fine-bubble diffusers and disc diffusers enhance oxygen transfer efficiency in aerobic reactors.

6.2 Koagulasi dan Flokulasi

Chemical addition (e.g., polymers, alum) destabilizes and aggregates fine particles into larger flocs.
Separation via sedimentation, screening, or filtration removes these flocs.

6.3 Penapisan Fizikal

• Screening and mesh filters capture large solids.
• Depth filters and sand filters remove finer particles.
• Tip: Use rotary valves rather than piston valves to minimize wear on seals and prevent solids packing.

6.4 Proses Pengoksidaan

Ozone, UV, dan hydroxyl radicals break down or enlarge organic particles, easing subsequent removal.

7. Amalan Terbaik untuk Pengurusan TSS

• Regular monitoring: Continuously sample TSS to detect spikes early.
• Source control: Implement erosion controls and pretreatment at industrial sites.
• Process optimization: Adjust coagulant dosage, hydraulic retention times, and diffuser maintenance schedules.
• Advanced technologies: Explore membrane bioreactors, electrocoagulation, or green infrastructure solutions.