Description
MC75 PVC Counter Flow Cooling Tower Fills For Infill Marley Cooling Tower is easy to install, clean, and transport. Featuring a bonding design, this fill allows for straightforward installation and maintenance, effectively addressing deformation issues caused by scale buildup and self-weight, which can complicate cleaning.
Marley MC75 pvc cooling tower fill is a film fill system designed for counterflow towers offering you several distinct advantages.Crossed corrugations provide the surface area and turbulence to develop efficient heat transfer. The corrugations inherently establish uniform fill sheet spacing at 0.75.Its structural design offers diversion benefits. The Marley cooling tower fill incorporates precise 19 mm spacing, promoting water flow perpendicular to the fill surface and creating a larger water film for enhanced air contact. The vertical flow diverter ensures a more uniform and reasonable distribution of gas and water.
MC75 pvc cooling tower fill is thermoformed from 0.015thick, UV inhibited, chemically-resistant polyvinyl chloride(PVC). The flame spread rating is less than 25 per ASTM E-84 and is considered self-extinguishing. The material is extruded and manufactured to rigid specifications before forming.
Using Marley MC75 film fill in place of existing splash type fill in counterflow towers usually means reduced fill height, which translates into reduced pumping head. MC75 will also provide greater cooling tower capacity, which means your current performance level will require less fan energy.
The fill pack depth(air travel) is variable to provide the proper heat transfer area within a single fill layer. If another layer of fill is necessary for situations where additional air travel is required, it will be limited to only one. Limiting the number of interfaces between packs minimizes restrictions that usually cause fill clogging.
Key Charters of MC75 Cooling Tower Film Fill
- Assured Improved Thermal Performance—Crossed corrugations provide the surface area and turbulence to develop efficient heat transfer. The corrugations inherently establish uniform fill sheet spacing at 0.75″.
- Durability and Quality—MC75 fill is thermoformed from .015″ thick, UV inhibited, chemically-resistant polyvinyl chloride (PVC). The flame spread rating is less than 25 per ASTM E-84 and is considered self-extinguishing. The material is extruded and manufactured to rigid specifications before forming.
- Improved System Efficiency—Using Marley MC75 film fill in place of existing splash type fill in counterflow towers usually means reduced fill height, which translates into reduced pumping head. MC75 will also provide greater cooling tower capacity, which means your current performance level will require less fan energy.
- Easily Adapted to Your Tower Configuration—The fill pack depth (air travel) is variable to provide the proper heat transfer area within a single fill layer. If another layer of fill is necessary for situations where additional air travel is required, it will be limited to only one. Limiting the number of interfaces between packs minimizes restrictions that usually cause fill clogging. MC75 counterflow fill can be hung from structural members or it can be bottomsupported in virtually all counterflow cooling towers, regardless of a cooling tower’s age or manufacturer.
key benefits:
- It can be configured for hanging or bottom support.
- Crossed corrugations enhance surface area and turbulence for efficient heat transfer.
- Uniform spacing of 0.75″ is maintained by the corrugations.
- The fill pack height can be adjusted to optimize heat transfer in a single layer.
- Only one additional fill layer is allowed if more air travel is needed.
- Fewer interfaces between packs reduce clogging risks.
- Made from .015″ thick, UV-resistant, and chemically durable PVC.
- It has a flame spread rating below 25 per ASTM E-84, classifying it as self-extinguishing.
Specifications
Related Cooling Tower Fill Products
Packages
